Azpects EasyJoint is a comprehensive and easy-to-use jointing compound for paving. With no need to mix, this compound is quick to brush in and perfect to use alongside various forms of paving material. Available in different colours, EasyJoint holds up well against weathering... Read More
SUPER Rewards Earn points and build more across our SUPERSTORES!
Find out moreAzpects EasyJoint is a comprehensive and easy-to-use jointing compound for paving. With no need to mix, this compound is quick to brush in and perfect to use alongside various forms of paving material.
Available in different colours, EasyJoint holds up well against weathering and is incredibly long-lasting on joints that are 3mm wide and over. Once opened, the remaining product can still be used, in turn reducing waste and making the most of your money.
Easyjoint can be used in wet or dry conditions and is sold in a 12.5kg tub which will cover an average of 7m² depending on slab size and joint width.
Please note:
There are no product downloads to show.
Question:
Can you pressure wash your slabs with this product?
Answer:
Yes, you can clean our paving joints with a pressure washer, but it must be done cautiously and after the EASYJoint Original sweep in sand has set hard. We recommend leaving newly laid EASYJoint Original for at least 4 weeks before cleaning it.
When you clean the patio, hold the power washer at an angle of about 45⁰ degrees and using a fan spray from no closer than 150mm from the paving joint. For stubborn stains and dirty paving, use our EASY Care Patio & Deck cleaner - for extremely contaminated areas of paving, natural stone or garden ornaments, use EASY Hardscape Cleaner.
EASYJoint Original paving compound sets hard on contact with air but remains permeable. As water drains through the joints, contaminants in the water will collect at the surface of the paving joint, but these can easily be cleaned & washed away, leaving the paving joint looking like new.
Question:
Is the product resistant to power washing?
Answer:
Yes, you can clean our paving joints with a pressure washer, but it must be done cautiously and after the EASYJoint Original sweep in sand has set hard. We recommend leaving newly laid EASYJoint Original for at least 4 weeks before cleaning it.
When you clean the patio, hold the power washer at an angle of about 45⁰ degrees and using a fan spray from no closer than 150mm from the paving joint. For stubborn stains and dirty paving, use our EASY Care Patio & Deck cleaner - for extremely contaminated areas of paving, natural stone or garden ornaments, use EASY Hardscape Cleaner.
EASYJoint Original paving compound sets hard on contact with air but remains permeable. As water drains through the joints, contaminants in the water will collect at the surface of the paving joint, but these can easily be cleaned & washed away, leaving the paving joint looking like new.
Products We Recommend
Product Enquiry Form